The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Materials

  • FabPro™ Elastic BLK

    summary:
    Design elastomeric material, rubber-like
    Bottle Volume:
    1 kg
    Layer Thickness:
    0.100 mm | 0.004 in
    Vertical Build Speed:
    14 mm/hr | 0.55 in/hr
    Liquid Density:
    1.06 g/cm3
    Cured Part Properties:
    Solid Density:1.13 g/cm3$0.041 lb/in3
    Cured Part Properties:
    Tensile Strength/ASTM D638:3.9 MPa$570 psi
    Cured Part Properties:
    Tensile Modulus/ASTM D638:3.7 MPa$540 ksi
    Cured Part Properties:
    Elongation at Break/ASTM D638:81%$81%
    Cured Part Properties:
    Water Absorption (24 hours)/ASTM D638:1.30%$1.30%
    Cured Part Properties:
    Tg/DMA, E”:-24 °C$-11 °F
    Cured Part Properties:
    CTE >Tg
    /ASTM E831:226 ppm/°C$126 ppm/°F
    Cured Part Properties:
    Compression Set/ASTM D395:Not Detectable$Not Detectable
    Cured Part Properties:
    Tear Strength/ASTM D624:7.3 kN/m$41.7 lbf/in
    Cured Part Properties:
    Shore Hardness/ASTM D2240:65 A$65 A
    Technical Specifications:
    FabPro 1000 Technical Specifications (English A4)@/content/materials/3d-systems-fabpro-tech-specs-us-a4-2019-01-31-web.pdf
    Technical Specifications:
    FabPro 1000 Technical Specifications (English)@/content/materials/3d-systems-fabpro-1000-tech-specs-usen-2019-01-31-web.pdf
    £155.00
    Add to Cart
  • FabPro™ JewelCast GRN

    summary:
    Material for jewelry casting
    Bottle Volume:
    125 x 70 x 120 mm
    Layer Thickness:
    0.030 mm | 0.001 in
    Vertical Build Speed:
    5.3 mm/hr | 0.21 in/hr
    Liquid Density:
    1.10 g/cm3
    Cured Part Properties:
    Solid Density:1.18 g/cm3$0.043 lb/in3
    Cured Part Properties:
    Tensile Strength/ASTM D638:14 MPa$2000 psi
    Cured Part Properties:
    Tensile Modulus/ASTM D638:355 MPa$51.5 ksi
    Cured Part Properties:
    Elongation at Break/ASTM D638:10%$10%
    Cured Part Properties:
    Flexural Modulus/ASTM D790:577 MPa$84 ksi
    Cured Part Properties:
    Flexural Strength/ASTM D790:14 MPa$2030 psi
    Cured Part Properties:
    Tg/DMA, E":-1 °C$31 °F
    Cured Part Properties:
    CTE >Tg/CTE ASTM E831:185 ppm/°C
    169 ppm/°C$102 ppm/°F
    94 ppm/°F
    Technical Specifications:
    FabPro 1000 Technical Specifications (English A4)@/content/materials/3d-systems-fabpro-1000-tech-specs-us-a4-2018-03-23-t-web.pdf
    Technical Specifications:
    FabPro 1000 Technical Specifications (English)@/content/materials/3d-systemsfabpro-1000-tech-specs-usen-2018-04-11-web.pdf
    £219.00
    Add to Cart
  • FabPro™ Proto GRY

    summary:
    Fast, general purpose plastic
    Bottle Volume:
    1 kg
    Layer Thickness:
    0.050 mm | 0.002 in
    Vertical Build Speed:
    21 mm/hr | 0.83 in/hr
    Liquid Density:
    1.04 g/cm3
    Cured Part Properties:
    Solid Density:1.13 g/cm3$0.041 lb/in3
    Cured Part Properties:
    Tensile Strength/ASTM D638:67 MPa$9700 psi
    Cured Part Properties:
    Tensile Modulus/ASTM D638:2800 MPa$410 ksi
    Cured Part Properties:
    Elongation at Break/ASTM D638:7%$7%
    Cured Part Properties:
    Flexural Modulus/ASTM D790:2840 MPa$410 ksi
    Cured Part Properties:
    Flexural Strength/ASTM D790:100 MPa$14500 psi
    Cured Part Properties:
    Izod Notched Impact/ASTM D256:23 J/m$0.4 ft-lb/in
    Cured Part Properties:
    Izod Unnotched Impact/ASTM D256:123 J/m$2.3 ft-lb/in
    Cured Part Properties:
    Water Absorption (24 hours)/ASTM D638:0.25%$0.25%
    Cured Part Properties:
    Tg/DMA, E”:82 °C$180 °F
    Cured Part Properties:
    Heat Deflection Temperature
    @0.46 MPa | 66 psi
    @1.82 MPa | 264 psi/ASTM D648:79 °C
    66 °C$175 °F
    151 °F
    Cured Part Properties:
    CTE >Tg
    CTE/ASTM E831:107 ppm/°C
    111 ppm/°C$59 ppm/°F
    62 ppm/°F
    Cured Part Properties:
    Shore Hardness/ASTM D2240:83 D$83 D
    Technical Specifications:
    FabPro 1000 Technical Specifications (English A4)@/content/materials/3d-systems-fabpro-1000-tech-specs-us-a4-2018-03-23-t-web.pdf
    Technical Specifications:
    FabPro 1000 Technical Specifications (English)@/content/materials/3d-systemsfabpro-1000-tech-specs-usen-2018-04-11-web.pdf
    £119.00
    Out of stock
  • FabPro™ Tough BLK

    summary:
    Durable production plastic
    Bottle Volume:
    1 kg
    Layer Thickness:
    0.050 mm | 0.002 in
    Vertical Build Speed:
    21 mm/hr | 0.83 in/hr
    Liquid Density:
    1.04 g/cm3
    Cured Part Properties:
    Solid Density:1.12 g/cm3$0.040 lb/in3
    Cured Part Properties:
    Tensile Strength/ASTM D638:44 MPa$64 psi
    Cured Part Properties:
    Tensile Modulus/ASTM D638:1860 MPa$270 ksi
    Cured Part Properties:
    Elongation at Break/ASTM D638:44%$44%
    Cured Part Properties:
    Flexural Modulus/ASTM D790:2020 MPa$290 ksi
    Cured Part Properties:
    Flexural Strength/ASTM D790:64 MPa$9700 psi
    Cured Part Properties:
    Izod Notched Impact/ASTM D256:36 J/m$0.7 ft-lb/in
    Cured Part Properties:
    Izod Unnotched Impact/ASTM D256:568 J/m$11 ft-lb/in
    Cured Part Properties:
    Water Absorption (24 hours)/ASTM D638:0.3%$0.3%
    Cured Part Properties:
    Tg/DMA, E”:57 °C$134 °F
    Cured Part Properties:
    Heat Deflection Temperature
    @0.46 MPa | 66 psi
    @1.82 MPa | 264 psi/ASTM D648:48 °C
    42 °C$ 119 °F
    107 °F
    Cured Part Properties:
    CTE >Tg/CTE ASTM E831:130 ppm/°C
    161 ppm/°C$72 ppm/°F
    89 ppm/°F
    Cured Part Properties:
    Shore Hardness/ASTM D2240:79 D$79 D
    Technical Specifications:
    FabPro 1000 Technical Specifications (English A4)@/content/materials/3d-systems-fabpro-1000-tech-specs-us-a4-2018-03-23-t-web.pdf
    Technical Specifications:
    FabPro 1000 Technical Specifications (English)@https://www.3dsystems.com/sites/default/files/2018-04/3d-systemsfabpro-1000-tech-specs-usen-2018-04-11-web.pdfFabPro 1000 Technical Specifications (English)@/content/materials/3d-systemsfabpro-1000-tech-
    £135.00
    Add to Cart
You're Currently in the United Kingdom Store
Currently shipping to United Kingdom

Visit another region store:

North America
Shipping to USA, Canada
and Mexico
European Union
Shipping to Spain, France, Germany and Italy
China
Shipping to China
 
Don't see your region?
Sign up now to be notified when new shipping regions become available >
Note: For orders with multiple shipping regions, individual orders in each region are required. You must complete the order in the cart before moving to another region, as cart items do not transfer between regional stores.